Hillyard Multi-Flo XP Floor Finish System Complete, HIL50110, sold as 1 each

$1,622.89

In stock soon.

Multi Flo XP Floor Finish System Complete

The Best Way To Apply Floor Finish

Clean

Multi-Flo XP is for more than just restorative projects, use it for everyday cleaning
Fresh cleaning solution is applied to the leading edge of the floor pad at the touch of a button delivering superior cleaning results
Fast and efficient with a wide 30 inch path

Strip

The safe alternative to a process that is inherently slick and slippery
Apply and agitate stripping solution without stepping in it
The applicator head has risers that lift the pad off the floor providing the optimum combination of saturation, agitation, and dwell time

Carpet Pre-Spray

Unlike pump-up sprayers, the carpet pre-spray system provides consistent, uniform and complete coverage of the carpet surface resulting in superior cleaning results
High-volume, wide 30 inch spray pattern delivers greater productivity

Consistency

An independently weighted application head provides an optimum level of pressure to the applicator, consistently achieving specified coverage rates. The result is uniform coats of finish that make your floor look great, regardless of who is applying the finish. Traditional methods rely on the operators touch and experience. The weight of gravity feed systems constantly changes as product is being applied, making it nearly impossible to achieve consistent, uniform coats.

Maneuverability

Four independent swivel castors allow for maximum maneuverability. It's easy for an operator to get the Multi-Flo XP into tight corners, around pillars, or moving in a straight line. The articulating handle gives the operator complete control and the freedom to perfectly position the Multi-Flo XP in the tightest spots.

Improve Productivity

The Multi-Flo XP is fast! Apply floor finish at rates up to 10,000 square feet per hour in open areas like hallways, gymnasiums, and multi-purpose rooms.
Apply finish in smaller rooms at a rate of 6,000 square feet per hour. That's a typical 900 square foot classroom in less than 10 minutes.

Simple Clean Up

Use finish right out of its own container. There are no extra buckets, reservoirs or special backpacks to fill, clean or transfer leftover finish from. If there is left-over finish with the Multi-Flo XP, just put the cap back on the container.
A very short run of large diameter tubing is easily flushed clean. For water-based finishes, a small amount of water is circulated through the pump. Solvent-based finishes require a solvent rinse.

Versatility-Use On Many Surfaces

Specifications:

Manufacturer:	Hillyard
Model:	HIL50110
Machine Type:	Multi Flo XP - Floor Finish System Complete
Battery Life:	100,000 square feet on a full charge
PM plan available:	Absolutely!

Customer Reviews

(0.00)

# of Ratings: 0

(Only registered customers can rate)